search search
open modal
loader
Accessories /
Livestock Equipment /
Water Rippler Extension Cord – 10 Foot | Fits Electric, Solar & Dual Power

Keep the tank where the animals drink, not where the outlet is. This 10 ft extension cord adds reach between your Water Rippler and its power connection. Every Water Rippler ships with a 6 ft power cord, and 6 ft is not always enough when the outlet is on the barn wall or the battery sits at the fence line. With the extension in place you have 16 ft from the unit to the converter or solar cable.

Ships direct from the manufacturer, 3 to 5 business days Fits the Electric, Solar and Dual Power models Genuine Water Rippler part Questions? 1-888-249-7412

How it works

One end plugs into the Water Rippler's own 6 ft cord. The other plugs into the power side of your setup. On the Electric model that is the outdoor-rated AC/DC converter that goes to a 120V outlet. On the Solar model it is the 15 ft solar cable with ring terminals that runs to your 12V battery. The Dual Power model ships with both the converter and the solar cable, so the extension works either way.

Because it sits between the unit and the converter, the extension carries 12V DC. It is not meant for the run between the converter and the wall outlet.

Which Water Rippler is right for you?

This part fits all three Water Rippler models. They share the same body, pump and caps and differ only in how they are powered.

Swipe sideways to compare all three.

ElectricSolarDual Power
Power sourceStandard 120V outlet through the included outdoor-rated AC/DC converterYour own 12V battery and solar panelsEither one: outlet or your solar setup
Cords in the box6 ft power cord and AC/DC converter6 ft power cord and 15 ft solar cable with ring terminals6 ft power cord, AC/DC converter and 15 ft solar cable
You supplyAn outlet, GFCI recommendedBattery, panels and an MPPT charge controllerAn outlet, or battery, panels and controller
Best forTanks by the barn or anywhere a cord reachesRemote tanks with no outlet nearbyTanks that move between the barn and the pasture, or keeping both options open
PageWater Rippler – Electric PoweredWater Rippler – Solar PoweredWater Rippler – Dual Power

What is in the box

10 Foot Extension Cord

One black 10 ft extension cord with a connector on each end. The converter, the solar cable and the unit itself are not included. Those come with the Water Rippler you already own.

Which part do I need?

What you seeCheck firstPart
Flow has droppedFlush the screen in the water or clean it by handIf it no longer cleans up: Replacement Filter
Water stopped, power is good, screen is cleanConfirm power at the outlet or batterySpare Pump Kit
The cord will not reach the outlet or batteryThe unit ships with a 6 ft cord10 Foot Extension Cord, 16 ft total

What to know before buying

This cord only covers the unit side of the converter. If you need more length on the household side as well, the manufacturer says the converter can be connected to a 12-gauge, outdoor-rated extension cord, and it recommends a GFCI-protected outlet.

Each Water Rippler has its own 6 ft cord and its own power connection, so plan one extension for every unit that needs the extra reach. That matters on tanks over 500 gallons, where the manufacturer calls for two units. Like the rest of the Water Rippler line, the extension ships direct from the manufacturer.

Key Features

  • Adds 10 ft of reach: extends the standard 6 ft cord to 16 ft
  • Fits every model: Electric, Solar and Dual Power
  • Keeps the tank in place: no need to move the tank or the outlet
  • One per unit: tanks over 500 gallons run two Water Ripplers, so plan two extensions

Pairs well with

Replacement FilterKeep a spare for mid-winter Spare Pump KitThe one wear part, on the shelf Water Rippler – Electric PoweredPlugs into a 120V outlet Water Rippler – Solar PoweredRuns on your 12V battery and panels Water Rippler – Dual PowerOutlet or solar, both cords included
SKU: V0757.WR-PART-EXT-01
  • Adds 10 ft of reach: extends the Water Rippler's 6 ft power cord to 16 ft
  • Plugs in between: the unit's cord and the AC/DC converter (Electric) or the 15 ft solar cable (Solar)
  • Fits every model: Electric, Solar and Dual Power
  • 12V DC side: sits on the unit side of the converter, not between the converter and the outlet
  • Black cord, connector on each end
  • One per unit: tanks over 500 gallons run two Water Ripplers, so plan two extensions
  • Brand:  Water Rippler
  • Cord Length:  10 ft (extends the standard 6 ft cord to 16 ft)
  • Compatibility:  All Water Rippler models, AC or solar power
  • Color:  Black
  • Connection:  Plugs between the unit cord and the AC/DC converter or solar cord
Water Rippler Extension Cord – 10 Foot | Fits Electric, Solar & Dual Power
$29.95
Only 0 left in stock
Ships direct from Mfg. in 3-5 business days
With this item, you’re $20.05 away from FREE shipping

Keep the tank where the animals drink, not where the outlet is. This 10 ft extension cord adds reach between your Water Rippler and its power connection. Every Water Rippler ships with a 6 ft power cord, and 6 ft is not always enough when the outlet is on the barn wall or the battery sits at the fence line. With the extension in place you have 16 ft from the unit to the converter or solar cable.

Ships direct from the manufacturer, 3 to 5 business days Fits the Electric, Solar and Dual Power models Genuine Water Rippler part Questions? 1-888-249-7412

How it works

One end plugs into the Water Rippler's own 6 ft cord. The other plugs into the power side of your setup. On the Electric model that is the outdoor-rated AC/DC converter that goes to a 120V outlet. On the Solar model it is the 15 ft solar cable with ring terminals that runs to your 12V battery. The Dual Power model ships with both the converter and the solar cable, so the extension works either way.

Because it sits between the unit and the converter, the extension carries 12V DC. It is not meant for the run between the converter and the wall outlet.

Which Water Rippler is right for you?

This part fits all three Water Rippler models. They share the same body, pump and caps and differ only in how they are powered.

Swipe sideways to compare all three.

ElectricSolarDual Power
Power sourceStandard 120V outlet through the included outdoor-rated AC/DC converterYour own 12V battery and solar panelsEither one: outlet or your solar setup
Cords in the box6 ft power cord and AC/DC converter6 ft power cord and 15 ft solar cable with ring terminals6 ft power cord, AC/DC converter and 15 ft solar cable
You supplyAn outlet, GFCI recommendedBattery, panels and an MPPT charge controllerAn outlet, or battery, panels and controller
Best forTanks by the barn or anywhere a cord reachesRemote tanks with no outlet nearbyTanks that move between the barn and the pasture, or keeping both options open
PageWater Rippler – Electric PoweredWater Rippler – Solar PoweredWater Rippler – Dual Power

What is in the box

10 Foot Extension Cord

One black 10 ft extension cord with a connector on each end. The converter, the solar cable and the unit itself are not included. Those come with the Water Rippler you already own.

Which part do I need?

What you seeCheck firstPart
Flow has droppedFlush the screen in the water or clean it by handIf it no longer cleans up: Replacement Filter
Water stopped, power is good, screen is cleanConfirm power at the outlet or batterySpare Pump Kit
The cord will not reach the outlet or batteryThe unit ships with a 6 ft cord10 Foot Extension Cord, 16 ft total

What to know before buying

This cord only covers the unit side of the converter. If you need more length on the household side as well, the manufacturer says the converter can be connected to a 12-gauge, outdoor-rated extension cord, and it recommends a GFCI-protected outlet.

Each Water Rippler has its own 6 ft cord and its own power connection, so plan one extension for every unit that needs the extra reach. That matters on tanks over 500 gallons, where the manufacturer calls for two units. Like the rest of the Water Rippler line, the extension ships direct from the manufacturer.

Key Features

  • Adds 10 ft of reach: extends the standard 6 ft cord to 16 ft
  • Fits every model: Electric, Solar and Dual Power
  • Keeps the tank in place: no need to move the tank or the outlet
  • One per unit: tanks over 500 gallons run two Water Ripplers, so plan two extensions

Pairs well with

Replacement FilterKeep a spare for mid-winter Spare Pump KitThe one wear part, on the shelf Water Rippler – Electric PoweredPlugs into a 120V outlet Water Rippler – Solar PoweredRuns on your 12V battery and panels Water Rippler – Dual PowerOutlet or solar, both cords included
SKU: V0757.WR-PART-EXT-01

  • Adds 10 ft of reach: extends the Water Rippler's 6 ft power cord to 16 ft
  • Plugs in between: the unit's cord and the AC/DC converter (Electric) or the 15 ft solar cable (Solar)
  • Fits every model: Electric, Solar and Dual Power
  • 12V DC side: sits on the unit side of the converter, not between the converter and the outlet
  • Black cord, connector on each end
  • One per unit: tanks over 500 gallons run two Water Ripplers, so plan two extensions
Brand
Water Rippler
Cord Length
10 ft (extends the standard 6 ft cord to 16 ft)
Compatibility
All Water Rippler models, AC or solar power
Color
Black
Connection
Plugs between the unit cord and the AC/DC converter or solar cord

Extension cord questions

It plugs in between the Water Rippler's 6 ft power cord and the AC/DC converter on an electric setup, or between the unit's cord and the 15 ft solar cable on a solar setup. It does not go between the converter and the wall outlet.
Yes. The extension fits every Water Rippler model: Electric, Solar and Dual Power. On the Solar model it sits between the unit's cord and the 15 ft solar cable. The Dual Power model ships with both the converter and the solar cable, so it can use the extension on either power source.
The Water Rippler ships with a 6 ft power cord. Adding this 10 ft extension gives you 16 ft from the unit to the converter or to the solar cable connection. The solar cable adds another 15 ft on its own, and the converter still has to reach a 120V outlet.
A household cord belongs on the other side of the converter. The manufacturer says the converter can be connected to a 12-gauge, outdoor-rated extension cord and recommends a GFCI-protected outlet. This 10 ft extension is made for the connection between the unit's cord and the converter.
Yes. Each Water Rippler has its own 6 ft cord and its own power connection, so order one extension for every unit that needs the added reach. On a tank over 500 gallons the manufacturer calls for two units, so that setup may need two extensions. Each package holds one black 10 ft cord.
It ships direct from the manufacturer in 3 to 5 business days, the same as every Water Rippler item. If you order it with a Water Rippler unit, a Replacement Filter or a Spare Pump Kit, those come from the same manufacturer. Questions about an order? Call Agzaga at 1-888-249-7412.

We Can't Find Any Reviews, Yet
Login Login to leave a review

There Aren't Any Questions, Yet
If you've got one, just ask!
Login Login to leave a question
Pairs well with
Water Rippler Spare Pump Kit | Ready-to-Install, Complete Backup Pump Set
Water Rippler Spare Pump Kit | Ready-to-Install, Complete Backup Pump Set
$44.99
Water Rippler Replacement Filter | Protects Pump & Outlet Ports
Water Rippler Replacement Filter | Protects Pump & Outlet Ports
$9.99

Extension cord questions

It plugs in between the Water Rippler's 6 ft power cord and the AC/DC converter on an electric setup, or between the unit's cord and the 15 ft solar cable on a solar setup. It does not go between the converter and the wall outlet.
Yes. The extension fits every Water Rippler model: Electric, Solar and Dual Power. On the Solar model it sits between the unit's cord and the 15 ft solar cable. The Dual Power model ships with both the converter and the solar cable, so it can use the extension on either power source.
The Water Rippler ships with a 6 ft power cord. Adding this 10 ft extension gives you 16 ft from the unit to the converter or to the solar cable connection. The solar cable adds another 15 ft on its own, and the converter still has to reach a 120V outlet.
A household cord belongs on the other side of the converter. The manufacturer says the converter can be connected to a 12-gauge, outdoor-rated extension cord and recommends a GFCI-protected outlet. This 10 ft extension is made for the connection between the unit's cord and the converter.
Yes. Each Water Rippler has its own 6 ft cord and its own power connection, so order one extension for every unit that needs the added reach. On a tank over 500 gallons the manufacturer calls for two units, so that setup may need two extensions. Each package holds one black 10 ft cord.
It ships direct from the manufacturer in 3 to 5 business days, the same as every Water Rippler item. If you order it with a Water Rippler unit, a Replacement Filter or a Spare Pump Kit, those come from the same manufacturer. Questions about an order? Call Agzaga at 1-888-249-7412.
0 / 5
0 Reviews, 0 Q&As
Login Login to share your review or question
We Can't Find Any Reviews, Yet
Login Login to leave a review
There Aren't Any Questions, Yet
If you've got one, just ask!
Login Login to leave a question
Submit